MS-Series Mixers
MS-Series Mixers to be used for Machine Mixing
STATOMIX™ MS Series static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.
MS Series static mixers are also available with support washers. The washer will prevent the elements from extruding out the end of the housing when working with high pressure applications.
MS static mixers are suitable for all types of meter, mix and dispensing systems. Check with our sales department for the correct static mixer for your equipment.
NOTE: The only functional difference between ME series and MS series is the inner diameter of the bell inlet housing: ME = .625 inches and MS = .657 inches
MS Series for Multiple Ratios Including 1:1, 2:1, 4:1 & 10:1
| Part No. | Description | Inner Diameter | Num. of Elements | Outer Diameter | Length(mm) | Nozzle Dia. A | Approx Content Vol(ml) |
|---|---|---|---|---|---|---|---|
| 102503 | MS 05-24 | 5.00 mm | 24 | 8.00 mm | 149 | 1.50 | 2.30 |
| 102504 | MS 05-32 | 5.00 mm | 32 | 8.00 mm | 188 | 1.50 | 2.80 |
| 102505 | MS 06-24 | 6.35 mm | 24 | 10.00 mm | 185 | 1.90 | 4.20 |
| 102506 | MS 06-32 | 6.35 mm | 32 | 10.00 mm | 234 | 1.90 | 6.60 |
| 102507 | MS 06-48 | 6.35 mm | 48 | 10.5 mm | 334 | 2.20 | 10.00 |
| 102508 | MS 06-56 | 6.35 mm | 56 | 10.5 mm | 378 | 4.50 | 11.00 |
| 102510 | MS 08-24 | 8.00 mm | 24 | 12.00 mm | 223 | 2.40 | 8.50 |
| 102511 | MS 08-32 | 8.00 mm | 32 | 12.00 mm | 287 | 2.40 | 11.50 |
| 102514 | MS 10-24 | 10.00 mm | 24 | 14.00 mm | 276 | 3.00 | 16.00 |
| 102515 | MS 10-32 | 10.00 mm | 32 | 14.00 mm | 352 | 3.00 | 23.00 |
| 102512 | MS 1012-0832 | 10.00-8.00 mm | 12 + 32 | 14.00-12.00 mm | 409 | 2.40 | 19.00 |
| 102518 | MS 13-24 | 13.00 mm | 24 | 17.00 mm | 293 | 4.00 | 27.00 |
| 102503 | MS 13-32 | 13.00 mm | 32 | 17.00 mm | 379 | 4.00 | 34.50 |
| 102516 | MS 1312-1032 | 13.00-10.00 mm | 12 + 32 | 17.00-14.00 mm | 499 | 7.20 | 37.50 |