ME-Series Mixers

Contact MixTips

ME-Series Mixers to be used for Machine Mixing

STATOMIX™ ME series static mixers, when used with meter mix equipment, provide a low cost solution for 2-component mixing. The mixer element is molded of polyacetal to withstand the higher pressures of meter mix machines.
ME Series static mixers are also available with support washers. The washer will prevent the elements from extruding out the end of the housing when working with high pressure applications.
STATOMIX™ ME static mixers are suitable for all types of meter, mix and dispensing systems. Check with our sales department for the correct static mixer for your equipment.

(NOTE: The only functional difference between the ME Series and the MS Series is the inned diameter of the bell inlet housing: ME=.625 inches and MS=.657 inches)

ME Series for Multiple Ratios Including 1:1, 2:1, 4:1 & 10:1

Part No.	Description	Inner Diameter	Num. of Elements	Outer Diameter	Length(mm)	Nozzle Diameter	Approx Content Vol(ml)
102448	ME 05-24	5.00 mm	24	8.00 mm	149	1.50	2.30
102449	ME 05-32	5.00 mm	32	8.00 mm	188	1.50	2.80
102450	ME 06-24	6.35 mm	24	10.00 mm	185	1.90	4.20
102451	ME 06-32	6.35 mm	32	10.00 mm	234	1.90	6.60
102452	ME 06-48	6.35 mm	48	10.5 mm	334	2.20	10.00
102453	ME 08-24	8.00 mm	24	12.00 mm	223	2.40	8.50
102454	ME 08-32	8.00 mm	32	12.00 mm	287	2.40	11.50
102456	ME 10-24	10.00 mm	24	14.00 mm	276	3.00	16.00
102457	ME 10-32	10.00 mm	32	14.00 mm	352	3.00	23.00
102455	ME 1012-0832	10.00-8.00 mm	12 + 32	14.00-12.00 mm	409	2.40	19.00
102459	ME 13-24	13.00 mm	24	17.00 mm	293	4.00	27.00
102451	ME 13-32	13.00 mm	32	17.00 mm	379	4.00	34.50
102458	ME 13-32	13.00 mm	32	17.00 mm	379	4.00	34.50
102516	ME 1312-1032	13.00-10.00 mm	12 + 32	17.00-14.00 mm	499	7.20	37.50